USER’S MANUAL
9.17HRO MOTORIZED TREADMILL
MODEL NUMBER: 9.17HRO
USER WEIGHT LIMITATION: 350lbs. (160kgs.)
SERIAL NUMBER (found on frame):
3
SMOOTH 9.17HRO MOTORIZED TREADMILL
POWER REQUIREMENTS
Power Requirements:
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN
ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS
TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH
THE PRODUCT, IF IT WILL NOT FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED
ELECTRICIAN.
This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage
spikes, surges and noise interference can result from weather conditions or from other appliances being turned on or
off. To reduce the possibility of treadmill damage, always use a surge protector (not included) with your treadmill.
Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge
protector with a UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed voltage
rating of 400V or less and an electrical rating 120VAC, 15 amps.
This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance
for electric current, should the treadmill malfunction. This treadmill comes with an electrical cord having an
equipment-grounding conductor and a grounding plug. Always plug the power cord into a surge protector, and plug
the surge protector into an appropriate outlet that is properly installed and grounded in accordance with all local
codes and ordinances.
This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in the
drawing below.
Visit us at: www.smoothfitness.com
4
SMOOTH 9.17HRO MOTORIZED TREADMILL
PREASSEMBLY
Open the boxes:
You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are
included in the boxes. Check the Hardware Comparison Chart for a full count of the number of parts included for this
product to be assembled properly. If you are missing any parts or have any assembly questions call the
manufacturer.
Gather your tools:
Before starting the assembly of your unit, make sure that you have gathered all the necessary tools you may require
to assemble the unit properly. Having all of the necessary equipment at hand will save time and make the assembly
quick and hassle-free.
Clear your work area:
Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is
free from anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a
comfortable amount of free area around the unit for unobstructed operation.
Invite a friend:
Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another
person when assembling this product.
User Weight Limitation:
Please note that there is a weight limitation for this product. If you weigh more than 350lbs. (160kgs.) it is not
recommended that you use this product. Serious injury may occur if the user’s weight exceeds the limit
shown here. This product is not intended to support users whose weight exceeds this limit.
Visit us at: www.smoothfitness.com
5
SMOOTH 9.17HRO MOTORIZED TREADMILL
HARDWARE COMPARISON CHART
Hardware chart:
For your convenience, we have identified the hardware used in the assembly of this product. This chart is provided
to help you identify those items that may be unfamiliar to you.
NO. DESCRIPTION
Console Support Fixing
Plate
QTY.
9
2
M6 x 15mm Console
Fixing Screw
11
16
17
2
8
2
#8 x 25mm Screw
Handlebar Fixing Plate
M8 x 25mm Allen Head
Bolt
18
6
M8 x 15mm Allen Head
Bolt
19
A
4
1
1
1
Wrench
B
Screw Driver
Allen Wrench
C
MILIMETERS
Visit us at: www.smoothfitness.com
6
SMOOTH 9.17HRO MOTORIZED TREADMILL
PARTS LIST
NO. DESCRIPTION
QTY.
1
ORDER NO.
9.17HRO-01
9.17HRO-02
9.17HRO-03
9.17HRO-04
9.17HRO-05
9.17HRO-06
9.17HRO-07
9.17HRO-08
9.17HRO-09
9.17HRO-10
9.17HRO-11
9.17HRO-12
9.17HRO-13
9.17HRO-14
9.17HRO-15
9.17HRO-16
9.17HRO-17
9.17HRO-18
9.17HRO-19
9.17HRO-20
9.17HRO-21
9.17HRO-22
9.17HRO-23
9.17HRO-24
9.17HRO-25
9.17HRO-26
9.17HRO-27
NO. DESCRIPTION
Upright Cross Brace Bolt
QTY. ORDER NO.
1
Computer
28
29
30
31
32
33
34
35
36
37
38
39
40
42
43
44
45
46
47
48
49
50
51
52
53
54
55
2
2
1
1
1
1
1
1
1
54
1
1
2
1
4
2
2
2
1
4
1
2
2
4
1
1
1
9.17HRO-28
9.17HRO-29
9.17HRO-30
9.17HRO-31
9.17HRO-32
9.17HRO-33
9.17HRO-34
9.17HRO-35
9.17HRO-36
9.17HRO-37
9.17HRO-38
9.17HRO-39
9.17HRO-40
9.17HRO-42
9.17HRO-43
9.17HRO-44
9.17HRO-45
9.17HRO-46
9.17HRO-47
9.17HRO-48
9.17HRO-49
9.17HRO-50
9.17HRO-51
9.17HRO-52
9.17HRO-53
9.17HRO-54
9.17HRO-55
Console Housing-
Upper
2
1
Metal Cap
Console Housing-
Bottom
3
1
Upright-Left
Console Tray
Support Tube
4
Rubber Insert
4
Rubber Cap for
Audio Input
5
2
Upright Cross Brace
M8 x 25mm Console Tray
Support Tube Bolt
6
Safety Key
1
7
Console Support Tube
1
Handlebar-Right
Front Handlebar
Upright-Right
#8 x 10mm Console
Housing Screw
8
11
2
Console Support Tube
Fixing Plate
9
#8 x 19mm
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Computer Screw
5
#8 x 15mm Drill Screw
M6 x 15mm
Console Fixing Screw
Elevation Motor
Cover Board
2
Handlebar Cover-
Left #1
1
Power Cord
Handlebar Cover-
Left #2
M6 x 15mm
Bolt for Power Plate
1
Handlebar Cover-
Right #2
1
Power Plate
Handlebar Cover-Right
#1
1
Pivot Bracket Screw
Pivot Bracket
#8 x 25mm Screw
8
Handlebar Fixing Plate
2
Transport Wheel Shaft
M14 x 90mm Bolt
Wire Clip
M8 x 25mm
Allen Head Bolt
6
M8 x 15mm
Allen Head Screw
4
#8 x 10mm Screw
3
Base Frame End Cap
Elevation Motor
Cir-Clip
Console Tray
Fixing Plate
1
Console Tray
1
Console Tray Cover
Handlebar-Left
1
Transport Wheel
5/16” x 10mm Screw
1
16 x 10mm
Spring Washer
Handlebar Grip
2
EKG Pulse Sensor
Handlebar End Cap
2
M10 x 35mm Bolt
Base Frame
2
Visit us at: www.smoothfitness.com
7
SMOOTH 9.17HRO MOTORIZED TREADMILL
PARTS LIST
NO. DESCRIPTION
QTY. ORDER NO.
NO. DESCRIPTION
QTY. ORDER NO.
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
Diving Tube
Micro Switch
Level Adjuster
1
3
9.17HRO-56
9.17HRO-57
9.17HRO-58
9.17HRO-59
9.17HRO-60
9.17HRO-61
9.17HRO-62
9.17HRO-63
9.17HRO-64
9.17HRO-65
9.17HRO-66
9.17HRO-67
9.17HRO-68
9.17HRO-69
9.17HRO-70
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Running Belt
Rear Roller Shaft
Rear Roller
1
1
1
1
2
9.17HRO-84
9.17HRO-85
9.17HRO-86
9.17HRO-87
9.17HRO-88
9.17HRO-89
9.17HRO-90
9.17HRO-91
9.17HRO-92
9.17HROI-93
9.17HRO-94
9.17HRO-95
9.17HRO-96
9.17HRO-97
9.17HRO-98
9.17HRO-99
9.17HRO-100
9.17HRO-101
9.17HRO-102
9.17HRO-103
4
Fold Up Position
Limiting Rod
1
Front Shroud
Fold Up Slipping
Rod Sleeve
M5 x 20mm
Allen Head Screw
2
Position Limiter
Fold Up Slipping Rod
Wheel Support
M8 x 40mm Bolt
PU Wheel
2
Round Cap
2
Elevation Support
Frame-#1
1
2
1
Cir-Clip
2
2
2
4
2
2
2
4
2
1
1
1
2
2
12 x 34.5mm Shaft
M14 x 53mm Bolt
Copper Bushing-#1
4
Motor Bottom Tray
Motor Hood
1
Elevation Support
Frame-#2
1
M4 x 25mm
Motor Hood Screw
2
M14 x 62mm Bolt
Plastic Cap
13 x 6.5mm Washer
M5 x 12mm Screw
N/A
13
2
Copper Bushing-#2
#6202 Bearing
N/A
100 Transformer-Controller
101 Motor Control Board
102 Elevation Control Board
Side Rail-Right
Side Rail-Left
Deck End Cap-Left
Deck End Cap-Right
1
1
9.17HRO-73
9.17HRO-74
9.17HRO-75
9.17HRO-76
9.17HRO-77
9.17HRO-78
9.17HRO-79
9.17HRO-80
9.17HRO-81
9.17HRO-82
9.17HRO-83
Motor Hood
1
103 Fixing Bracket
1
104 N/A
M8 x 25mm
Deck Fixing Bolt
10
2
105 M5 Nut
1
1
9.17HRO-105
9.17HRO-106
9.17HRO-107
9.17HRO-108
9.17HRO-109
9.17HRO-110
9.17HRO-111
Deck Grounding
Metal Sheet-Upper
M5 x 10mm
106 Philip Head Screw
#8 x 10mm Wood
Screw
7
107 Lock Pin Guider
108 Lock Pin Push Rod
109 Deck Frame
1
Running Deck
Front Roller Shaft
Front Roller
1
1
1
1
1
110 Spring Load Knob
111 Deck Rubber Cushion
1
Roller Pulley
1
10
Visit us at: www.smoothfitness.com
8
SMOOTH 9.17HRO MOTORIZED TREADMILL
PARTS LIST
NO. DESCRIPTION
QTY. ORDER NO.
NO. DESCRIPTION
QTY. ORDER NO.
Power Fold Switch
112 Side Rail Guide Block
113 M10 x 16mm Bolt
M6 x 70mm
114 Roller Adjuster Bolt
8
8
9.17HRO-112
9.17HRO-113
9.17HRO-114
9.17HRO-115
9.17HRO-116
9.17HRO-117
9.17HRO-118
9.17HRO-119
9.17HRO-120
9.17HRO-121
9.17HRO-122
9.17HRO-123
9.17HRO-124
9.17HRO-125
9.17HRO-126
9.17HRO-127
9.17HRO-128
9.17HRO-129
9.17HRO-130
9.17HRO-131
9.17HRO-132
9.17HRO-133
9.17HRO-134
9.17HRO-135
9.17HRO-136
9.17HRO-137
9.17HRO-138
9.17HRO-139
140 Wire-Upper Section
Power Fold Switch
141 Wire-Bottom Section
Safety Key Power
142 Wire-Bottom Section
Wire Loom-
143 Bottom Section
N/A
1
9.17HRO-140
9.17HRO-141
9.17HRO-142
9.17HRO-143
9.17HRO-144
9.17HRO-145
9.17HRO-146
9.17HRO-147
9.17HRO-148
3
N/A
1
115 M8 Nut
15 x 8mm Spring
116 Washer
10
12
5
144 Power Switch
145 Non-Fuse Brake
146 Power Socket
147 Water Bottle
1
117 Board Clip
118 Metal Clip
119 Wheel Shaft
120 M8 Nylon Nut
Running Deck Belly
121 Pan
Deck Frame
122 Rubber Cushion
1
1
1
2
1
1
Heart Rate
148 Transmitter Belt
3
1
149 N/A
150 N/A
151 N/A
152 N/A
EKG Pulse Sensor
153 Wire
EKG Pulse Sensor
154 Wire – Upper Section
2
123 Motor Belly Pan
124 Driving DC Motor
125 Motor Holder
1
1
1
2
2
1
9.17HRO-153
9.17HRO-154
9.17HRO-155
M8 x 87mm
126 Motor Holder Bolt
1
127 30 x 8mm Washer
128 PU Cushion
M8 x 15mm
129 Motor Fixing Bolt
2
155 Power Folding Switch
1
2
130 16 x 8mm Washer
131 M10 Nylon Nut
132 22 x 10mm Washer
133 M10 x 188mm Bolt
134 Driving Belt
2
1
1
1
1
135 Bracket Screw
136 AMC Sensor
1
N/A
6
137 Plastic Fixing Insert
Wire Loom-Upper
138 Section
Safety Key Power
139 Wire-Upper Section
1
1
Visit us at: www.smoothfitness.com
9
SMOOTH 9.17HRO MOTORIZED TREADMILL
PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
1
4
2
4
6
8
7
3
10
148
8
8
154
23
20
8
11
18
9
8
21
10
10
18
154
22
17
147
12
29
137
13
16
18
9
155
31
18
28
153
16
17
14
32
137
15
16
24
25
11
33
26
16
153
141
11
35
27
28
29
30
34
25
27
36
19
138
139
140
19
Visit us at: www.smoothfitness.com
10
SMOOTH 9.17HRO MOTORIZED TREADMILL
PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
Visit us at: www.smoothfitness.com
11
SMOOTH 9.17HRO MOTORIZED TREADMILL
PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
70
68
67
69
69
70
74
68
75
76
73
37
79
77
77
37
79
78
79
118
82
77
77
81
78
83
80
37
87
88
89
84
85
37
92
93
37
37
94
96
90
91
94
98
37
91
37
94
37
86
94
99
98
99
95
97
92
89
88
37
37
93
96
98
69
37
97
98
69
37
69
65
65
37
37
69
122
37
37
69
37
37
37
Visit us at: www.smoothfitness.com
12
SMOOTH 9.17HRO MOTORIZED TREADMILL
ASSEMBLY
STEP 1:
Remove the upper carton from your treadmill and cut down the corners of the lower carton, as shown in FIG1. Then
remove the Handlebars and place them out of the way for now, as shown in FIG2.
Attach the Console Housing (3) to the Left Upright (30) and secure using the Console Support Tube Fixing Plate (9)
and M8 x 25mm Allen Head Bolts (18). Take care not to trap any wires at this point
FIG.1
FIG.2
Visit us at: www.smoothfitness.com
13
SMOOTH 9.17HRO MOTORIZED TREADMILL
ASSEMBLY
STEP 2:
First connect the wires between Left Upright (30) and Base Frame (55). Rotate up the Left Upright (30) and Right
Upright (36) then secure it to the Base Frame (55) with four M8 x 15mm Allen Head Screws (19).
NOTE: Make sure all wires are recessed into the frame, do not trap any of the wires. Do not fully tighten screws (19)
at this point. You may find it easier to stand on the bed of the treadmill to perform this part of the assembly.
30
36
19
19
55
138
139
140
30
141
55
143
142
Visit us at: www.smoothfitness.com
14
SMOOTH 9.17HRO MOTORIZED TREADMILL
ASSEMBLY
STEP 3:
Rotate the Console Housing (3) to position as shown and secure with two M6 x 15 Screws (11).
Visit us at: www.smoothfitness.com
15
SMOOTH 9.17HRO MOTORIZED TREADMILL
ASSEMBLY
STEP 4:
Attach the Upright Cross Brace (32) to the Left and Right Uprights (30 and 36) and secure with Metal Caps (29) and
Upright Cross Brace Bolts (28). Do Not fully tighten Bolts (28) at this point but do fully tighten Screws (19) after
you’ve assembled the cross brace (32).
Visit us at: www.smoothfitness.com
16
SMOOTH 9.17HRO MOTORIZED TREADMILL
ASSEMBLY
STEP 5:
Remove the Bracket Screw (135) from Console Tray Fixing Plate (21). Attach the Console Tray (22) to the Console
Housing (3) and secure by screwing the Bracket Screw (135) through the Console Tray Fixing Plate (21) and into the
Console Housing (3), as shown in FIG3.
FIG3
Visit us at: www.smoothfitness.com
17
SMOOTH 9.17HRO MOTORIZED TREADMILL
ASSEMBLY
STEP 6:
Insert the Console Tray Support Tube (31) into the Upright Cross Brace (32). Rotate the Upright Cross Brace (32)
and insert the top of the Console Tray Support Tube into the Console Tray (22), as shown in FIG4. Secure the
Console Tray Support Tube (31) in place using the M8 x 25 Console Tray Support Tube Bolt (33). Tighten the
Upright Cross Brace Bolt (28).
Visit us at: www.smoothfitness.com
18
SMOOTH 9.17HRO MOTORIZED TREADMILL
ASSEMBLY
STEP 7:
Connect the Sensor Wires, as shown in FIG5. Attach the Handlebar-Right (34) and Handlebar-Left (24) to the
Right and Left Uprights (36 and 30) and secure with Handlebar Fixing Plates (17) and M8 x 25 Allen Head
Bolts (18).
NOTE: Please make sure not to pinch the Sensor Wires when attaching the Handlebars.
Visit us at: www.smoothfitness.com
19
SMOOTH 9.17HRO MOTORIZED TREADMILL
ASSEMBLY
STEP8:
Attach the Handlebar Cover-Right #1 (15) and Handlebar Cover-Right #2 (14) to the Upright-Right (36) and secure
with #8 x 25 Handlebar Cover Screws (16) and Plastic Fixing Inserts (137). Repeat the procedure on the Upright-Left
(30) with Handlebar Cover-Left #1 (12), Handlebar Cover-Right (13) and #8 x 25 Handlebar Cover Screws (16) and
Plastic Fixing Inserts (137).
Visit us at: www.smoothfitness.com
20
SMOOTH 9.17HRO MOTORIZED TREADMILL
POWER FOLD INSTRUCTIONS
In order for the power fold system to work you need to plug your 9.17HRO in and insert the safety key.
The 9.17HRO treadmill has a unique Easy-Up power fold system. Before folding the 9.17HRO press the “reset”
button on the console. This will ensure that the 9.17HRO is in its lowest position and the 9.17HRO will fold. The
9.17HRO won’t fold unless it’s in this position.
Follow these instructions to power fold your 9.17HRO:
1. Press stop on the console and wait until the belt has fully stopped.
2. Press “reset” on the console. The deck will now de-elevate to Level 1.
3. Turn the Spring Loaded Knob clockwise until it’s fully engaged. A click can be felt at this point.
4. Push the Power Fold Switch located on the front of the Left Upright and the deck will now start to fold. Keep
holding this switch until the deck has fully folded.
5. Turn off the power and unplug the treadmill before you leave it. Do not leave the treadmill unattended and
plugged in at any time.
Visit us at: www.smoothfitness.com
21
SMOOTH 9.17HRO MOTORIZED TREADMILL
UNFOLDING INSTRUCTIONS
IMPORTANT
Before unfolding the 9.17HRO plug the treadmill in and insert the safety key.
Follow these instructions to un-fold your 9.17HRO.
1. Push the Power Fold Switch “down”. The 9.17HRO will now start to descend. Keep holding the switch until the
deck has fully descended.
2. Turn the Spring Loaded Knob counter clockwise until it disengages. If you do not do this the 9.17HRO will not
elevate/incline while being used.
IMPORTANT: Never tilt your treadmill using the incline wheels when repositioning or moving your treadmill.
Only roll/push the treadmill on the floor wheels.
Visit us at: www.smoothfitness.com
22
SMOOTH 9.17HRO MOTORIZED TREADMILL
LEVEL ADJUSTMENT
Uneven flooring could cause the Spring loaded Knob not to engage and thus prevent the 9.17HRO from
folding or being able to incline.
To adjust the level you will need the help of another person, as you will need to tip the treadmill on its side.
Tip the treadmill to the left/right. You will see the stabilizers. These will need to be screwed either in or out to level
the treadmill. Repeat for the other side. It may help to use a spirit level when adjusting the level on your treadmill.
Visit us at: www.smoothfitness.com
23
SMOOTH 9.17HRO MOTORIZED TREADMILL
MAINTENANCE
HOW TO MAINTAIN YOUR TREADMILL:
Proper maintenance is very important to ensure your treadmill is always in top working condition. Improper
maintenance could cause damage or shorten the life of your treadmill.
•
•
Important: Never use abrasives or solvents to clean the treadmill. To prevent damage to the computer,
keep liquids away and keep it out of direct sunlight.
Inspect and tighten all parts of the treadmill regularly. Replace any worn parts immediately.
BELT ADJUSTMENT:
The running belt has been properly adjusted at the factory. However transportation, uneven flooring or other
unpredicted reasons could cause the belt to shift off center resulting in the belt rubbing with the plastic side rail or end
caps and possibly causing damage. To adjust the belt back to it’s proper position please follow the directions below:
1. If your belt tends to walk to the right, rotate the right tension bolt clockwise. We recommend adjustments of
1/4 turn at a time, and follow with a test. If your belt continues to walk to the right, simply adjust the left belt
tension bolt by turning it 1/4 turn counterclockwise, and follow with a test.
2. If your belt tends to walk to the left, rotate the left tension bolt clockwise 1/4 turn at a time, and follow with a
test. If the belt continues to walk to the left, simply adjust the right tension bolt counterclockwise.
3. If your belt appears to be loose, simply tighten both bolts evenly 1/4 turn. If it appears tight, simply loosen
both bolts evenly 1/4 turn.
Right and left tension bolts are located at the rear of the treadmill.
DECK LUBRICATION:
The walking belt has been pre-lubricated at the factory. However, it is recommended that the walking board be
checked periodically for lubrication to ensure optimal treadmill performance. Your treadmill should not have to be
lubricated usually within the first year or 500 hours of use.
Every 3 months of operation lift the sides of the walking belt and feel the top surface of the walking board as far as
you can reach. If you feel signs of silicone, no further lubrication is required. If it feels dry to the touch, follow the
instructions below.
Please use a non-petroleum based silicone.
Visit us at: www.smoothfitness.com
24
SMOOTH 9.17HRO MOTORIZED TREADMILL
MAINTENANCE
To apply lubricant to the walking belt:
1. Position the walking belt so that the seam is located on top and in center of the walking board.
2. Insert the spray nozzle into the spray head of the lubricant can.
3. While lifting the side of the walking belt, position the spray nozzle between the walking belt and the board
approximately 15 cm (6 inches) from the front of the treadmill. Apply the silicone spray to the walking board,
moving from the front of the treadmill to the rear. Repeat this on the other side of the belt. Spray
approximately 4 seconds on each side.
4. Allow the silicone to "set" for 1 minute before using the treadmill.
Spray lubricant from front to back.
CLEANING:
Routine cleaning of your treadmill will extend the product's life.
•
•
•
•
Warning: To prevent electrical shock, be sure the power to the treadmill is OFF and the power cord is
unplugged from the wall electrical outlet before attempting any cleaning or maintenance.
Important: Never use abrasives or solvents to clean the treadmill. To prevent damage to the computer,
keep liquids away and keep it out of direct sunlight.
After each workout: Wipe off the console and other treadmill surfaces with a clean, water dampened soft
cloth to remove excess perspiration.
Weekly: Use of a treadmill mat is recommended for ease of cleaning. Dirt from your shoes contacts the
belt and eventually makes it to underneath the treadmill. Vacuum underneath treadmill once a week.
Visit us at: www.smoothfitness.com
25
SMOOTH 9.17HRO MOTORIZED TREADMILL
WARRANTY
LIMITED HOME USE WARRANTY – SMOOTH FITNESS Treadmills Warranty
Warranty Coverage: EVO Fitness and Smooth Fitness, Inc. ("Smooth Fitness") warrants to the original owner that each new
product to be free from defects in workmanship and material, under normal use and conditions.
Period of Coverage: The Warranty on this product runs from the date of original purchase using the following schedule:
Drive
Model Name
5.25
6.25HR
Frame
Lifetime
Lifetime
Lifetime
Lifetime
Lifetime
Lifetime
Motor
Lifetime
Lifetime
Lifetime
Lifetime
Lifetime
Lifetime
Parts & Electronics
3 years
Labor
1 year
1 year
1 year
1 year
1 year
1 year
5 years
7.1HR PRO
9.17HRO
9.25HR
5 years
5 years
5 years
9.25X
Lifetime
Labor: Smooth Fitness will reimburse for labor costs for One (1) year. Smooth Fitness reserves the right to either:
Hire and reimburse an independent service technician who will come into the home for the repair,
OR
In the event that there is not an available certified Smooth Fitness service technician, Smooth will send the part directly to the
consumer and will pay $75 US per occurrence for the labor costs of such repair. If multiple repair attempts must be made for one
reported problem, Smooth will only reimburse once per occurrence.
Smooth Fitness reserves the right to inspect damaged parts for misuse. Your Original Receipt is proof of purchase and should be
kept with the product manual. You may be required to show proof of purchase prior to warranty service being initiated.
Remedy Provided by Smooth Fitness: Smooth Fitness will provide a replacement part free of charge if a defect is found during
the Warranty period. Smooth Fitness may at its discretion, choose to provide any of following parts or repair options. In the event
that a part is determined in need of replacement, upon receipt of the part by Smooth Fitness, Smooth Fitness may send out the part
by UPS ground or another such carrier directly to the customer’s home. The customer is responsible for the cost of sending the part
to Smooth Fitness.
For the 9.25X Model Only: This warranty covers all parts including frame, electronics and wear parts for a lifetime. If Smooth
Fitness in its sole discretion determines that the treadmill cannot or should not be repaired, it may decide to purchase the unit for the
residual value in accordance with the following: 25% of retail purchase price after 5 years, 15% after 10 years, 5% after 15 years.
Any redemption may be by repair or replacement of the affected parts and/or product at the sole discretion of Smooth Fitness, by
personnel approved by Smooth Fitness.
Parts repaired or replaced pursuant to this Warranty shall be warranted for the unexpired portion of the Warranty applying to the
original product. Any technical advice furnished before or after delivery in regard to the use or application of Smooth Fitness
products is furnished without charge and on the basis that it represents Smooth Fitness' best judgment under the circumstances but
that the advice is used at your sole risk.
Procedure for Obtaining Your Remedy Under This Warranty: To obtain service on a Smooth Fitness product, call Smooth
Fitness. In the instance that service is not available in an area, Smooth Fitness, at its discretion, can either 1) find a service
technician in your area to perform warranty service, 2) have a local dealer perform warranty service, or 3) send the warranty parts to
you and reimburse as described above. To help the technician assist you, please have the following information ready:
•
•
•
Model name or number from the cover of the manual;
Serial number located on the frame of the unit; and
The part description and the order number.
Limitations on Warranty: This Warranty will only apply to the original end user. This Warranty does not cover wear and tear
(except the 9.25X treadmill), any problems, damages or failures that are caused by accident, improper assembly, failure to observe
cautionary labels on the product, failure to operate the product correctly, power grid failures or spikes from your local electricity
provider, abuse or freight damage. Smooth Fitness does not warrant against any damage or defects that may result from repair or
alterations made to the product by an unauthorized repair facility.
This Warranty shall terminate if you sell or otherwise transfer this product. This Warranty does not apply to any product shipped or
handled outside of the United States or Canada. This Warranty does not apply if the product is used as a rental product or in
commercial use. Consequential and incidental damages are not recoverable under this Warranty. (Some states do not allow
the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.)
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER EXPRESS WARRANTIES. ALL IMPLIED WARRANTIES,
INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, ARE LIMITED IN
DURATION TO ONE (1) YEAR FROM THE EFFECTIVE DATE OF THIS WARRANTY. SMOOTH FITNESS IS NOT
LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING FROM ANY DEFECT IN PARTS NOR FOR
ANY BREACH OF EXPRESS OR IMPLIED WARRANTIES. SMOOTH FITNESS' SOLE LIABILITY UNDER THIS
WARRANTY IS LIMITED TO THE TERMS DESCRIBED IN THIS FORM. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
FORM WS-1 (rev. 08/2005)
Visit us at: www.smoothfitness.com
26
SMOOTH 9.17HRO MOTORIZED TREADMILL
IMPORTANT STEPS
Warning:
Before using this product, please consult your personal physician for a complete physical examination. Frequent and
strenuous exercise should be approved by your doctor first. If any discomfort should result from your use of this
product, stop exercising and consult your doctor. Proper usage of this product is essential. Please read your manual
carefully before exercising.
Please keep all children away from the equipment during use and when equipment is unattended.
Always wear appropriate clothing, including athletic shoes, when exercising. Do not wear loose clothing that could
become caught during exercising.
Make sure that all bolts and nuts are tightened when equipment is in use. Periodic maintenance is required on all
exercise equipment to keep it in good condition.
Before beginning:
How you begin your exercise program depends on your physical condition. If you have been inactive for several
years, or are severely overweight, you must start slowly and increase your time gradually, a few minutes per week.
Initially you may be able to exercise only for a few minutes in your target heart rate zone. However, your aerobic
fitness will improve over the next six to eight weeks. Don’t be discouraged if it takes longer. It’s important to work at
your own pace. Ultimately, you’ll be able to exercise continuously for 30 minutes. And the better your aerobic
fitness, the harder you will have to work to stay in your target heart rate zone. But remember these essentials:
•
Contact your physician before starting a workout or training program. Have your doctor review your training
and diet programs to advise you of a workout routine you should adopt.
•
•
Begin your training program slowly with realistic goals that have been set by you and your doctor.
Supplement your program with some type of aerobic exercise such as walking, jogging, swimming, dancing
and/or bicycling. Monitor your pulse frequently. If you do not have an electronic heart rate monitor, have
your physician show you the proper way to manually check your pulse by using your wrist or neck.
Establish your target heart rate based on your age and condition.
•
Drink plenty of fluids during the course of your routine. You must replace the water content lost from
excessive exercising to avoid dehydration. Avoid drinking large amounts of cold liquids. Fluids should be at
room temperature when consumed.
Visit us at: www.smoothfitness.com
27
SMOOTH 9.17HRO MOTORIZED TREADMILL
TARGET HEART RATE
Finding your pulse:
To make sure your heart is beating in its target zone, you’ll need to know how to monitor your heart rate. The easiest
way is to feel the pulse in the carotid artery on either side of your neck, between the windpipe and the large neck
muscles. Count the number of beats in ten seconds, and then multiply that number by six. This gives you the
number of beats per minute.
How fast should your heart beat during aerobic exercise? Fast enough to reach and stay in its “target zone,” a range
of beats per minute that is largely determined by your age and physical condition. To determine your target zone,
consult the chart we have provided.
FIND YOUR TARGET HEART RATE
200
180
160
140
120
100
80
20
25
30
35
40
45
50
55
60
65
70
AGE IN YEARS
ADVANCED: Sports, athletic conditioning or interval training
FITNESS: Optimal training, aerobic or cardiovascular
HEALTH: Beginner, low intensity with long duration produces fat burning
Aerobic exercise:
Is any sustained activity that sends oxygen to your muscles via your heart and lungs. It will improve the fitness of
your lungs and heart: your body’s most important muscle. Aerobic fitness is promoted by any activity that uses your
large muscle groups - arms, legs or buttocks, for example. Your heart beats quickly and you breathe deeply. An
aerobic exercise should be part of your entire exercise routine.
Visit us at: www.smoothfitness.com
28
SMOOTH 9.17HRO MOTORIZED TREADMILL
MUSCLE CHART
Targeted muscle groups:
The exercise routine that is performed on this product will develop primarily lower body muscle groups. These
muscle groups are shown in gray color on the chart below.
Shoulder muscles
Bicep muscle
A
C
E
G
I
B
D
F
H
J
Pectoral muscles
Abdominal muscles
Quadricep muscles
Trapezius muscles
Back muscles
Forearm muscles
Calf muscles
Tricep muscles
Gluteal muscles
K
L
Hamstring muscles
Visit us at: www.smoothfitness.com
29
SMOOTH 9.17HRO MOTORIZED TREADMILL
STRETCHING ROUTINE
Warm up and cool down:
A successful exercise program consists of a warm-up, aerobic exercise, and a cool-down. Do the entire program at
least two or three times a week, resting for a day between workouts. After several months, you can increase your
workouts to four or five times per week.
Warming up is an important part of your workout, and should begin every session. It prepares your body for more
strenuous exercise by heating up and stretching out your muscles, increasing your circulation and pulse rate, and
delivering more oxygen to your muscles. At the end of your workout, repeat these exercises to reduce sore muscle
problems. We suggest the warm-up and cool-down exercises on the following pages:
Toe Touch:
Slowly bend forward from your waist, letting your back and shoulders relax as you
stretch toward your toes. Reach down as far as you can and hold for 15 counts.
Shoulder Lift:
Lift your right shoulder up toward your ear for one count. Then lift your left
shoulder up for one count as you lower your right shoulder.
Head Roll:
Rotate your head to the right for one count, feeling the stretch up the left side of
your neck. Next, rotate your head back for one count, stretching your chin to the
ceiling and letting your mouth open. Rotate your head to the left for one count,
and finally, drop your head to your chest for one count.
Visit us at: www.smoothfitness.com
30
SMOOTH 9.17HRO MOTORIZED TREADMILL
STRETCHING ROUTINE
Hamstring Stretch:
Sit with your right leg extended. Rest the sole of your left foot against
your right inner thigh. Stretch toward your toe as far as possible. Hold
for 15 counts. Relax and then repeat with left leg extended.
Inner Thigh Stretch:
Sit with the soles of your feet together with your knees pointing outward.
Pull your feet as close into your groin as possible. Gently push your
knees towards the floor. Hold for 15 counts.
Side Stretch:
Open your arms to the side and continue lifting them until they are over
your head. Reach your right arm as far upward toward the ceiling as you
can for one count. Feel the stretch up your right side. Repeat this action
with your left arm.
Calf-Achilles Stretch:
Lean against a wall with your left leg in front of the right and your
arms forward. Keep your right leg straight and the left foot on the
floor; then bend the left leg and lean forward by moving your hips
toward the wall. Hold, and then repeat on the other side for 15
counts.
Visit us at: www.smoothfitness.com
31
SMOOTH 9.17HRO MOTORIZED TREADMILL
TROUBLESHOOTING
Troubleshooting
NOTE: Do not touch any internal electric wires without consulting the manufacturer.
Treadmill will not start:
1. Make sure the power cord is plugged into a surge protector, the surge protector is plugged into a properly
grounded outlet and the surge protector is turned on (refer to the Power Requirements section in this manual).
2. Check the circuit breaker reset switch located on the front of the treadmill. Turn the power off, wait 5 minutes
then press the rest switch.
3. Check the house electrical breaker box and the circuit breaker for the room the treadmill is located in. If it has
tripped, reset or have an electrician replace the breaker in home.
4. Have an electrician check for inadequate voltage at the outlet.
Treadmill looses power during use:
1. Check the circuit breaker reset switch located on the front of the treadmill. Turn the power off, wait 5 minutes
then press the rest switch.
If the treadmill still will not operate, please call Technical service at 1.888.800.1167.
2. Check the house electrical breaker box and the circuit breaker for the room the treadmill is located in. If it has
tripped, reset or have an electrician replace the breaker in home.
Treadmill walking belt slows during use:
1. Check to make sure the treadmill is securely plugged into an UL-listed surge protector, rated at 15 amps, with a
14-guage cord of five feet or less and the surge protector is securely plugged into the outlet. If the treadmill still will
not operate, please call Technical service at 1.888.800.1167.
Treadmill walking belt slips or is not centered on rear roller:
Refer to the Belt Adjustment section of this manual. If you require additional assistance please call Technical
service at 1.888.800.1167.
Visit us at: www.smoothfitness.com
Smooth Fitness
112 Gaither Drive
Mt. Laurel, NJ 08054
Toll Free Customer Service:
1.888.800.1167
Website:
Copyright © 2003
|