Sharp Car Video System PNH701 User Manual

PN-H701  
LCD MONITOR  
MONITEUR LCD  
MONITOR LCD  
SETUP MANUAL  
MANUEL D’INSTALLATION  
MANUAL DE INSTALACIÓN  
ENGLISH ...... E1  
FRANÇAIS..... F1  
ESPAÑOL .... S1  
 
[ENGLISH]  
Contents  
IMPORTANT INFORMATION............................................1  
DEAR SHARP CUSTOMER..............................................1  
SAFETY PRECAUTIONS..................................................2  
IMPORTANT SAFETY INSTRUCTIONS...........................3  
SAFETY INSTRUCTION ...................................................4  
MOUNTING PRECAUTIONS............................................4  
Supplied Components.....................................................5  
Preparing the Remote Control Unit................................5  
Connections.....................................................................6  
Turning Power On/Off......................................................7  
Specifications ..................................................................8  
Mounting Precautions  
(For SHARP dealers and service engineers).................8  
Read the manuals in the “Manual” folder of the provided CD-ROM. (Adobe Reader is required to view the manuals.)  
IMPORTANT INFORMATION  
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT  
TO RAIN OR MOISTURE.  
The lightning flash with arrowhead symbol, within  
a triangle, is intended to alert the user to the  
presence of uninsulated “dangerous voltage”  
CAUTION  
within the product’s enclosure that may be of  
sufficient magnitude to constitute a risk of electric  
shock to persons.  
RISK OF ELECTRIC  
SHOCK  
DO NOT OPEN  
The exclamation point within a triangle is  
intended to alert the user to the presence of  
CAUTION: TO REDUCE THE RISK OF ELECTRIC  
important operating and maintenance (servicing)  
SHOCK, DO NOT REMOVE COVER.  
instructions in the literature accompanying the  
NO USER-SERVICEABLE PARTS  
product.  
INSIDE.  
REFER SERVICING TO QUALIFIED  
SERVICE PERSONNEL.  
WARNING:  
FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the  
manufacturer could void the user’s authority to operate this equipment.  
NOTE:  
This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the  
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment  
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if  
not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.  
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required  
to correct the interference at his own expense.  
U.S.A. ONLY  
DEAR SHARP CUSTOMER  
Thank you for your purchase of a SHARP LCD product. To ensure safety and many years of trouble-free operation of your  
product, please read the Safety Precautions carefully before using this product.  
E
1
 
SAFETY PRECAUTIONS  
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly  
handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can  
result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing,  
operating and cleaning the product. To ensure your safety and prolong the service life of your LCD product, please read the  
following precautions carefully before using the product.  
1. Read instructions — All operating instructions must be read and understood before the product is operated.  
2. Keep this manual in a safe place — These safety and operating instructions must be kept in a safe place for future  
reference.  
3. Observe warnings — All warnings on the product and in the instructions must be observed closely.  
4. Follow instructions — All operating instructions must be followed.  
5. Cleaning — Unplug the power cord from the AC outlet before cleaning the product. Use a dry cloth to clean the product. Do  
not use liquid cleaners or aerosol cleaners.  
6. Attachments — Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can result  
in accidents.  
7. Water and moisture — Do not use the product near water. Do not install the product in a place where water may splash onto  
it. Be careful of equipment which drains water such as an air-conditioner.  
8. Ventilation — The vents and other openings in the cabinet are designed for ventilation.  
Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life  
of the product. Do not place the product on a sofa, rug or other similar surface, since they can block ventilation openings.  
Do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the  
manufacturer’s instructions are followed.  
9. Power cord protection — The power cords must be routed properly to prevent people from stepping on them or objects from  
resting on them.  
10. The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with  
impact. Be careful not to be injured by broken glass pieces in case the LCD panel breaks.  
11. Overloading — Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.  
12. Entering of objects and liquids — Never insert an object into the product through vents or openings. High voltage flows in  
the product, and inserting an object can cause electric shock and/or short internal parts.  
For the same reason, do not spill water or liquid on the product.  
13. Servicing — Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other  
dangerous conditions. Request a qualified service person to perform servicing.  
14. Repair — If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified service  
person to perform repairs.  
a. When the power cord or plug is damaged.  
b. When a liquid was spilled on the product or when objects have fallen into the product.  
c. When the product has been exposed to rain or water.  
d. When the product does not operate properly as described in the operating instructions.  
Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls  
not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified  
technician.  
e. When the product has been dropped or damaged.  
f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product  
needs servicing.  
15. Replacement parts — In case the product needs replacement parts, make sure that the service person uses replacement  
parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of  
unauthorized parts can result in fire, electric shock and/or other danger.  
16. Safety checks — Upon completion of service or repair work, request the service technician to perform safety checks to  
ensure that the product is in proper operating condition.  
17. Wall mounting — When mounting the product on a wall, be sure to install the product according to the method  
recommended by the manufacturer.  
18. Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating  
products (including amplifiers).  
19. Batteries — Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may corrode the equipment,  
dirty your hands or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below:  
• Use the specified batteries only.  
• Install the batteries with due attention to the plus (+) and minus (-) sides of the batteries according to the instructions in the  
compartment.  
• Do not mix old and new batteries.  
• Do not mix batteries of different types. Voltage specifications of batteries of the same shape may vary.  
• Replace an exhausted battery with a new one promptly.  
• If you will not use the remote control for a long time, remove the batteries.  
• If leaked battery fluid gets on your skin or clothing, rinse immediately and thoroughly. If it gets into your eye, bathe your  
eye well rather than rubbing and seek medical treatment immediately. Leaked battery fluid that gets into your eye or your  
clothing may cause a skin irritation or damage your eye.  
20. Usage of the monitor must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury,  
severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and  
missile launch control in a weapon system.  
E
2
 
SAFETY PRECAUTIONS (Continued)  
21. Do not stay in contact with the parts of the product that become hot for long periods of time. Doing so may result in  
low-temperature burns.  
22. To prevent fire or shock hazard, do not expose this product to dripping or splashing.  
No objects filled with liquids, such as vases, should be placed on the product.  
23. This product must only be connected to a 100-240V, 50/60Hz, grounded (3-prong) outlet.  
WARNING:  
1) This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may  
be required to take adequate measures.  
2) Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.  
3) To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.  
4) An apparatus with CLASS I construction shall be connected to a MAIN socket outlet with a protective earthing connection.  
To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: HDMI input terminal  
and PC D-sub input terminal.  
If a monitor is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries,  
particularly to children, can be avoided by taking simple precautions such as:  
• Using fixing devices like wall mount brackets recommended by the manufacturer.  
• Only using furniture that can safely support the monitor.  
• Ensuring the monitor is not overhanging the edge of the supporting furniture.  
• Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the  
monitor to a suitable support.  
• Not standing the monitors on cloth or other materials placed between the monitor and supporting furniture.  
• Educating children about the dangers of climbing on furniture to reach the monitor or its controls.  
Especially for child safety  
- Don’t allow children to climb on or play with the monitor.  
- Don’t place the monitor on furniture that can easily be used as steps, such as a chest of drawers.  
- Remember that children can become excited while watching a program, especially on a “larger than life” monitor. Care  
should be taken to place or install the monitor where it cannot be pushed, pulled over, or knocked down.  
- Care should be taken to route all cords and cables connected to the monitor so that they cannot be pulled or grabbed by  
curious children.  
IMPORTANT SAFETY INSTRUCTIONS  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that  
produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider  
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are  
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the  
obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point  
where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.  
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.  
13) Unplug this apparatus during lightning storms or when unused for long periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any  
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the  
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.  
E
3
 
SAFETY INSTRUCTION  
-
-
Do not use the monitor where there is a lot of dust, where humidity  
- The AC outlet shall be installed near the equipment and shall  
be easily accessible.  
is high, or where the monitor may come into contact with oil or  
steam. Do not use in an environment where there are corrosive  
gases (sulfur dioxide, hydrogen sulfide, nitrogen dioxide, chlorine,  
ammonia, ozone, etc.). As this could lead to fire.  
Ensure that the monitor does not come into contact with water  
or other fluids. Ensure that no objects such as paper clips or  
pins enter the monitor as this could lead to fire or electric shock.  
The Power Cord  
- Use only the power cord supplied with the monitor.  
- Do not damage the power cord nor place heavy objects on  
it, stretch it or over bend it. Also, do not add extension cords.  
Damage to the cord may result in fire or electric shock.  
- Do not place the monitor on top of unstable objects or in  
unsafe places. Do not allow the monitor to receive strong  
shocks or to strongly vibrate. Causing the monitor to fall or  
topple over may damage it.  
- Do not use the power cord with a power tap.  
Adding an extension cord may lead to fire as a result of  
overheating.  
- Do not use the monitor near heating equipment or in places  
where there is likelihood of high temperature, as this may  
lead to generation of excessive heat and outbreak of fire.  
- Do not use the monitor in places where it may be exposed to  
direct sunlight.  
- Please be sure to constantly remove dust and garbage that  
has attached to the ventilation opening. If dust collects in the  
ventilation opening or the inside of the monitor, it may lead to  
excessive heat, outbreak of fire, or malfunction.  
- Do not remove or insert the power plug with wet hands.  
Doing so could result in electric shock.  
- Unplug the power cord if it is not used for a long time.  
- Do not attempt to repair the power cord if it is broken  
or malfunctioning. Refer the servicing to the service  
representative.  
Please request a cleaning of the inside of the monitor from  
an authorized SHARP servicing dealer or service center.  
MOUNTING PRECAUTIONS  
This product is for use indoors.  
Temperature condition may change when using the monitor  
together with the optional equipments recommended by  
SHARP. In such cases, please check the temperature  
condition specified by the optional equipments.  
Do not block any ventilation openings. If the temperature  
inside the monitor rises, this could lead to a malfunction.  
Do not place the monitor on a device which generates heat.  
Adhere to the following when installing the monitor in its  
portrait orientation. Failing to adhere to the following may  
cause malfunctions.  
- Install the monitor such that the power LED is located on  
the bottom side.  
- Set the MONITOR on the MONITOR menu to PORTRAIT.  
(See OPERATION MANUAL.)  
• When installing the monitor in the portrait orientation, and  
the internal temperature of the monitor rises excessively,  
the brightness of the backlight automatically decreases in  
order to prevent a further temperature rise.  
A mounting bracket compliant with VESA specifications is  
required.  
Since the monitor is heavy, consult your dealer before  
installing, removing or moving the monitor.  
Mounting the monitor on the wall requires special expertise  
and the work must be performed by an authorized SHARP  
dealer. You should never attempt to perform any of this work  
yourself. Our company will bear no responsibility for accidents  
or injuries caused by improper mounting or mishandling.  
Use the monitor with the surface perpendicular to a level  
surface. If necessary, the monitor may be tilted up to 20  
degrees upward or downward.  
This monitor should be used at an ambient temperature  
between 32°F (0°C) and 104°F (40°C). Provide enough space  
around the monitor to prevent heat from accumulating inside.  
For the monitor in landscape orientation  
Unit: inch [mm]  
7-7/8 [200]  
1-3/8 [35]  
Use the supplied sticker.  
For the monitor in landscape orientation  
2
[50]  
2
[50]  
2 [50]  
For the monitor in portrait orientation  
Horizontal sticker  
(Logo)  
Unit: inch [mm]  
1-3/8 [35]  
7-7/8 [200]  
For the monitor in portrait orientation  
2
[50]  
2
[50]  
Vertical sticker  
(Operation panel)  
Power LED  
2 [50]  
If it is difficult to provide sufficient space for any reason such  
as the installation of the monitor inside a housing, or if the  
ambient temperature may be outside of the range of 32°F  
(0°C) to 104°F (40°C), install a fan or take other measures to  
keep the ambient temperature within the required range.  
Be careful not to cover the remote control sensor or buttons.  
E
4
 
Supplied Components  
If any component should be missing, please contact your dealer.  
Liquid Crystal Display Monitor: 1  
Remote control unit: 1  
Cable clamp: 4  
CD-ROM (Utility Disk for Windows): 1  
Setup Manual: 1  
Power cord clamp: 1  
Power cord clamp screw: 1  
USB flash drive cover: 1  
USB flash drive cover screw: 1  
Horizontal sticker (Logo): 1  
Vertical sticker (Operation panel): 1  
RS-232C conversion cable (Φ3.5 mini-jack): 1  
USB extension cable (about 20 cm): 1  
Cable clamp (insertion type): 2  
Power cord: 1  
R-6 battery (“AA” size): 2  
* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.  
* For environmental protection!  
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.  
Preparing the Remote Control Unit  
1. Press the cover gently and slide it in the direction of the arrow.  
2. See the instructions in the compartment and put in the supplied batteries (R-6 (“AA” size) x 2) with their plus (+) and minus (-)  
sides oriented correctly.  
3. Close the cover.  
E
5
 
Connections  
Caution  
• Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting  
cables. Also, read the manual of the equipment to be connected.  
• Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables  
connected to the input and output terminals may cause malfunctions and the other problems.  
1. AC input terminal  
2. PC D-sub input terminal  
3. LAN terminal  
4. Digital audio output (optical) terminal  
5. Audio input terminal  
6. CONTROL terminal  
(RS-232C input terminal)  
7. Headphone terminal  
8. USB port  
7
8
9
10  
9. HDMI1 input terminal  
10. HDMI2 input terminal  
11. HDMI3 input terminal  
12. HDMI4 input terminal  
11  
12  
1
2
3
4
5
6
Power cord  
(Supplied)  
For power outlet  
TIPS  
• Set the audio input terminal used for each input mode in AUDIO SELECT of AUDIO TERMINAL SETTING in the SETUP  
menu. The factory settings are shown below.  
Input mode  
INPUT1  
Video  
Audio input terminal (Factory setting)  
HDMI1 input terminal  
HDMI1 input terminal  
HDMI2 input terminal  
HDMI3 input terminal  
HDMI4 input terminal  
INPUT2  
HDMI2 input terminal  
INPUT3  
HDMI3 input terminal/Audio input terminal *1  
HDMI4 input terminal  
INPUT4  
INPUT5  
PC D-sub input terminal  
Audio input terminal *2  
MULTIMEDIA  
USB port / Internal memory  
USB port / Internal memory  
*1 Select the terminal to be used in HDMI of AUDIO SELECT.  
*2 Select the terminal to be used in PC D-SUB of AUDIO SELECT.  
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks  
of HDMI Licensing LLC in the United States and other countries.  
E
6
 
Turning Power On/Off  
Caution  
Turning power on/off  
• Turn on the monitor first before turning on the PC or  
playback device.  
Press the POWER button or POWER switch to turn the power  
ON/OFF.  
Turning on the main power  
Main power switch  
Power switch  
Status of the monitor  
Power on  
Power off (Standby mode)  
Power LED  
Status  
Green lit  
Orange lit  
Caution  
• The main power must be turned on/off with the main power  
switch. Do not connect/disconnect the power cord or turn  
the breaker on/off while the main power switch is on.  
• When switching the main power switch or the POWER  
button off and back on, always wait for at least 5 seconds.  
• For a complete electrical disconnection, pull out the main  
plug.  
Accessing the operation panel  
E
7
 
Specifications  
Model  
PN-H701  
Power requirement  
Operating temperature *  
Operating humidity  
Power consumption  
Dimensions (excluding protrusions)  
Weight  
AC 100 - 240 V, XX A, 50/60 Hz  
32°F to 104°F (0°C to 40°C)  
20% to 80% (no condensation)  
XX W  
inch (mm)  
Approx. 61-3/8 (W) x 2-3/4 (D) x 31-1/4 (H) (1559 x 69 x 794)  
lbs. (kg)  
Approx. 83.8 (38)  
* Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such  
cases, please check the temperature condition specified by the optional equipments.  
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement  
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from  
these values in individual units.  
Mounting Precautions (For SHARP dealers and service engineers)  
When installing, removing or moving the monitor, ensure that this is carried out by at least 3 people.  
Be sure to use a wall-mount bracket designed or designated for mounting the monitor.  
This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials  
such as plaster / thin plastic board / wood before starting installation.  
This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.  
Install by the most suitable method for the material and the structure.  
To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the  
thickness of the mounting bracket.  
Do not use an impact driver.  
When moving the monitor, be sure to hold the areas shown in the figure below. Do not hold the LCD panel. This may cause  
product damage, failure, or injury.  
After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.  
Do not use any screw holes other than VESA holes for installation.  
E
8
 
 
Printed in China  
Imprimé en Chine  
Impreso en China  
14M  
KS1  
(1)  
 

Sharp Microwave Oven R 1610 User Manual
Shoprider Mobility Scooter GK9 User Manual
Sony Digital Photo Frame DPF W700 User Manual
Sony Headphones DRE10IP GRN User Manual
Sony Headphones MDR AS30G User Manual
Southern Pride Smoker SPK 500 SL User Manual
Speco Technologies Security Camera HT 8WMTDV Series User Manual
Stamina Products Exercise Bike 15 9300 User Manual
Sylvania DVD Player SDVD9001 BLACK User Manual
Sylvania Flat Panel Television LC200SL9 A User Manual